
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-30SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop directly on your machine. You can set the outward travel anywhere between 55 and 85 mm without shims or part changes, while retract remains full length.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 rod thread. The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M14x1.5 rod outward travel on-site for different box heights, letting the fixed NBR bumper absorb the repeated end shock of high-speed packing lines.
Choose this specific model if your fixture requires frequent on-site stroke tuning during changeovers. Confirm your spec needs an 85 mm maximum stroke with a 30 mm window, PT1/8 port, the -S magnet for sensing, and the -B male M14x1.5 rod end. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 40 mm bore cylinder uses a PT1/8 air port.
Turning the external R M12x1.25 screw shortens the extend stroke by up to 30 mm, giving a usable range of 55 to 85 mm without changing parts. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.