
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-75S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X85-75S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 10 and 85 mm without swapping shims or parts.
The short riveted body saves axial mounting depth where a longer profile unit will not fit. End shock is handled by a fixed NBR bumper that decelerates the piston near the extremes; it is not an adjustable air cushion. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X85-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 10-85 mm extend stop during tooling changeovers to secure parts of varying widths without fabricating new spacer blocks.
Iteratively set the extend position for sample probes or dispensers, leveraging the built-in magnet to confirm end-of-travel with an electronic switch.
Stepping down, the SDAJ32 delivers 402.1 N at 0.5 MPa, whereas stepping up to the SDAJ50 yields 981.7 N at 0.5 MPa.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 10 to 85 mm extend window. It features a PT1/8 port, a 16 mm rod, and female M8x1.25 rod-end threads. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the M12x1.25 external screw shortens the extend stroke by up to 75 mm, yielding a usable forward range of 10 to 85 mm; retract remains full. The -S code indicates a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.