
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-100S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-100S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. This mechanism lets you dial the extend stop down from the 90 mm maximum all the way to 0 mm directly on the machine, eliminating the need for shims or part changes during setup. Retract remains full length, and the adjuster purely sets the stop position without altering the bore area.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, and the built-in magnet supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 0 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke stop on-site to handle varying package sizes on a sorting line, relying on the fixed NBR bumper to absorb the end shock.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 0-90 mm window.
Confirm the 40 mm bore, 90 mm max stroke, 100 mm adjust window, PT1/8 port, and the built-in magnet (-S). The female rod-end thread is M8x1.25. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M12x1.25 R screw shortens the extend stop by up to 100 mm, giving a usable extend range of 0-90 mm. It sets the mechanical stop without changing the force. The -S suffix indicates a built-in piston magnet for AirTAC reed or electronic switches; the fixed NBR bumper decelerates the stroke end but does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.