
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-10SB is a compact double-acting double-rod cylinder featuring an external R (M12x1.25) adjustment screw that dials the extend stop directly on your machine between 80 and 90 mm.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 threaded rod end (-B) instead of the default female M8x1.25. The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 90 mm during prototype tooling changes to find the exact contact point for a 32 kg vertical lift without swapping shims.
Adjust the mechanical stop in 1 mm increments to set precise insertion depths, letting the fixed NBR bumper absorb the end shock of each press cycle.
Choose this unit if your fixture requires precise on-site extend tuning to dial in final positioning.
Confirm the 90 mm maximum stroke with a 10 mm window, PT1/8 air port, and the -B male rod thread. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the R (M12x1.25) screw shortens the extend end position anywhere between 80 and 90 mm; retract remains full. The -S code indicates a built-in piston magnet for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.