
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-20 is a double-acting compact cylinder featuring an external R (M12x1.25) adjustment screw that dials the extend stop directly on your machine between 70 and 90 mm.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 90 mm to accommodate varying raw casting widths on a milling fixture without machining custom spacers.
Safely lift a 32 kg payload by setting the exact extend position via the M12x1.25 screw, preventing over-travel in tight vertical spaces.
Choose this unit when your fixture requires precise 70-90 mm extend tuning during frequent changeovers.
Confirm your parameters: 40 mm bore, 90 mm maximum stroke, 20 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and no magnet. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the bumper only decelerates near the end. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 30-500 mm/s and accepts pressures from 0.15 to 1.0 MPa.
Turning the external R (M12x1.25) screw mechanically shortens the extend end-position by up to 20 mm, giving a usable 70-90 mm range. It does not alter force or lock the piston mid-stroke. The fixed NBR bumper only decelerates the stroke end; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.