
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external R (M12x1.25) screw, you set the outward end position anywhere between 60 and 90 mm without changing parts.
This variant uses a male M14x1.5 piston rod thread and a PT1/8 air port. The short riveted body minimizes axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 90 mm to accommodate varying raw material thicknesses on a milling fixture without machining new spacers.
Set precise trial insertion depths for bushings or pins, relying on the fixed NBR bumper to absorb the end shock during repetitive assembly.
Choose this unit when your fixture requires frequent on-machine stroke tuning between 60 and 90 mm. It carries the -B male M14x1.5 rod end and no magnet. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The external M12x1.25 screw mechanically shortens the extend stroke from the 90 mm maximum down to 60 mm. It acts only as a travel stop, not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.