
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-30SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. A M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 60 and 90 mm, eliminating the need for shims or part swaps during machine commissioning.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches, along with a male M14x1.5 threaded rod end for secure mechanical attachments. The short riveted body drastically reduces axial mounting depth in tight machinery. End-of-stroke impact is managed by a fixed NBR bumper, which decelerates the piston rather than acting as an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 90 mm via the M12x1.25 screw to accommodate different part heights during production line changeovers without swapping cylinders.
Use the male M14x1.5 rod end to mount custom probes, adjusting the outward travel in the 30 mm window to find the exact contact depth before locking down the setup.
When sizing this 40 mm bore actuator, compare it against adjacent options using 0.5 MPa push figures. Stepping down, the SDAJ32 provides 402.1 N; stepping up, the SDAJ50 yields 981.7 N. Choose this specific unit when your fixture requires exact outward positioning tweaked at the machine, combined with a male M14x1.5 rod thread and a position-sensing magnet.
Confirm your parameters: 40 mm bore, 90 mm maximum stroke, 30 mm adjustment window, PT1/8 air port, -S magnet, and -B male rod. Remember that a standard compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end cap and the R screw is a mechanical stop, not a brake. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external R (M12x1.25) screw shortens the extend end position anywhere from the full 90 mm down to 60 mm, while retract remains full stroke. The included -S magnet enables detection by AirTAC reed or electronic switches mounted in the body grooves, and the screw sets the stop without altering the bore's output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.