
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-40 is a compact double-acting double-rod cylinder built for on-site extend-position tuning. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 50 and 90 mm without swapping shims or parts, while retract remains full length.
The short riveted body drastically cuts axial mounting depth where a longer profile or round-body unit will not fit. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston; it is not an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 90 mm via the M12x1.25 screw to match new fixture depths during rapid product family changeovers.
Choose this adjustable model for setup-heavy lines requiring frequent trial positioning. Confirm your parameters: 40 mm bore, 90 mm max stroke, 40 mm window, PT1/8 port, female M8x1.25 rod thread, and no magnet. Note that a plain cylinder drifts on air loss or valve centring—the bumper decelerates but never locks the load—so fit an external rod lock or pilot-operated check valve for holding.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw shortens the forward end-position by up to 40 mm, yielding a usable extend range of 50 to 90 mm. It acts purely as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.