
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the outward stroke down from the 90 mm maximum to anywhere between 50 and 90 mm directly on the machine.
Built with a short riveted body, this unit saves axial mounting depth where a longer cylinder would not fit. It uses a 16 mm piston rod with a male M14x1.5 thread, a PT1/8 air port, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 50 and 90 mm to set precise contact depth on varying material thicknesses without swapping out the cylinder body.
Safely lift loads up to 32 kg using the male M14x1.5 rod, adjusting the downward travel limit to prevent collisions in tight vertical spaces.
This makes it well suited for medium-force tooling setups that require frequent on-site stroke tuning.
Operators who need precise extend positioning during changeovers will benefit from the 40 mm adjustment window. However, remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the screw acts as a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your requirements for the 40 mm bore, 90 mm maximum stroke, 40 mm window, PT1/8 port, male M14x1.5 rod thread, and the lack of a magnet before ordering.
Quick checklist
Turning the M12x1.25 adjuster screw mechanically shortens the extend stop from the 90 mm maximum down to 50 mm. It does not alter the force and is not a mid-stroke lock; the cylinder cannot hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.