
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-40S is a compact double-acting double-rod cylinder featuring an on-machine extend stop. A side-mounted M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 50 and 90 mm, eliminating the need for shims or part swaps during changeovers.
Housed in a short riveted body, this unit saves axial mounting depth where a longer barrel would not fit. It uses a fixed NBR bumper at each end to decelerate the stroke rather than an adjustable air cushion. This specific variant includes a built-in piston magnet for position sensing with AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 50-90 mm extend stop during tooling changeovers to secure raw blocks of varying widths without fabricating custom spacer plates.
Stepping down, the SDAJ32 provides 402.1 N; stepping up, the SDAJ50 yields 981.7 N. Choose this model if your fixture requires frequent trial positioning or setup adjustments across a 40 mm window.
Confirm the 90 mm maximum stroke, 40 mm adjustment window, and PT1/8 port. The piston rod is 16 mm with a female M8x1.25 end thread. The -S suffix indicates the internal magnet is present for sensing. Note that a plain cylinder does not hold position on air loss or when a valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the M12x1.25 R screw shortens the extend stroke by up to 40 mm, allowing any stop position between 50 and 90 mm without changing parts. The screw sets a mechanical stop and does not alter force. The -S suffix means a built-in magnet is included for tracking position with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.