
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke down from the 90mm maximum to a 40mm minimum directly at the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the piston at the stroke ends. This base SKU lacks a piston magnet, so it cannot accept magnetic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 90 mm to clamp castings of varying heights without swapping out the entire actuator body.
Fine-tune the push rod end position on the fly to fold different box sizes accurately on a shared conveyor line.
Choose this specific unit when your fixture requires frequent on-site extend tuning between 40 and 90 mm.
Confirm the PT1/8 port, 16mm rod diameter, and female M8x1.25 rod-end thread suit your mounting hardware. Note that this non-magnet version cannot support sensing; add the -S option if your control system requires reed or electronic switches. Remember that a standard cylinder drifts when air is lost or the valve centers, so install an external rod lock or pilot-operated check valve for load holding.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 screw shortens the extend stroke by up to 50 mm, allowing any end position between 40 and 90 mm. It acts purely as a mechanical stop and does not alter the pneumatic force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.