
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X90-50B is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position anywhere between 40 and 90 mm directly on the machine, avoiding shims or part swaps. Retract remains at the full 90 mm stroke.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male M14x1.5 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X90-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 90 mm to set precise clamping depth on machining fixtures, accommodating varied part heights without manufacturing custom spacers.
Choose this unit when your fixture requires on-site extend tuning between 40 and 90 mm.
Confirm the 40 mm bore, 90 mm stroke, 50 mm adjust window, and PT1/8 air port meet your pneumatic layout. This variant has a male M14x1.5 rod end and no magnet. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed NBR bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force values.
The M12x1.25 adjuster screw mechanically shortens the extend stroke by up to 50 mm, allowing on-machine tuning between 40 and 90 mm. It is a stop only, not a mid-stroke lock; the cylinder cannot hold a load without live air pressure, and end-deceleration is handled by a fixed NBR bumper, not an adjustable cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.