
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X30-10B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop directly on the machine. You can set the outward stroke anywhere between 20 and 30 mm without swapping shims or parts.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders simply will not fit. This specific SKU includes a male M18x1.5 piston rod thread for direct mounting and operates on a PT1/4 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X30-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up production line changeovers by turning the external screw to shift the extend endpoint, avoiding the need to physically swap cylinder hardware.
Choose this model if your fixture requires on-site extend tuning between 20 and 30 mm.
Confirm the 50 mm bore, 30 mm maximum stroke, 10 mm adjustment window, and PT1/4 port match your pneumatic layout. This SKU has a male M18x1.5 rod thread (-B) and no piston magnet, meaning it cannot accept a reed or electronic switch without the -S option. Remember that a plain cylinder does not hold position on air loss or valve centre; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It uses a PT1/4 port, a male M18x1.5 piston rod thread, and an M16x1.5 adjuster screw.
Turning the external screw shortens the extend stroke by up to 10 mm, allowing an outward range of 20 to 30 mm. The screw acts only as a mechanical stop and does not alter force or lock mid-stroke; the cylinder drifts on air loss, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.