
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X35-10B is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the external M16x1.5 adjuster screw, you set the outward stroke anywhere between 25 and 35 mm without swapping shims or parts.
This unit ships with a male M18x1.5 piston rod (-B) and uses a PT1/4 air port. The short riveted body minimizes axial mounting depth where space is tight. End shock is managed by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the male M18x1.5 rod to push varied package widths on a conveyor, tweaking the 10 mm window on the machine without changing hardware during product changeovers.
Remember the fixed NBR bumper only decelerates the end of travel and will not lock the load.
If you need less force, the SDAJ40 delivers 628.3 N, while stepping up to the SDAJ63 yields 1558.6 N. This specific SKU includes a male M18x1.5 rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without changing to an -S variant.
The 10 mm adjustment window is ideal for trial positioning and frequent changeovers. Note that a plain double-acting cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts. For vertical loads requiring holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The air port is PT1/4.
Turning the external M16x1.5 screw shortens the extend stroke by up to 10 mm, allowing you to set the outward stop anywhere from 25 to 35 mm. The retract stroke remains full, and the adjuster sets the stop position without changing the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.