
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
Its short riveted body saves mounting depth where round-body or profile cylinders cannot fit. An external M16x1.5 adjustment screw lets you dial the extend stop on the machine between 15 and 35 mm without shims.
This SKU features a male M18x1.5 piston rod thread and a PT1/4 port. The adjuster sets the mechanical stop position and does not alter the bore area, so force remains equal to a standard SDA of this size. End shock is absorbed by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 35 mm on-site via the M16x1.5 screw to adapt a 50 kg vertical lift station to new part heights without changing hardware.
Fit the short riveted body into a tight 50 mm bore pressing assembly where axial depth is restricted, using the fixed NBR bumper to absorb end shocks.
Choose it for setups requiring on-site stroke tuning between 15 and 35 mm.
Confirm the 20 mm adjustment window, PT1/4 port, and the male M18x1.5 rod thread for your mounting interface. Note that a plain cylinder does not hold position on air loss or valve centering; for load holding without live pressure, install an external rod lock or pilot-operated check valve. This specific SKU lacks a piston magnet and cannot take a switch.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend stroke by up to 20 mm, allowing you to set the stop anywhere between 15 and 35 mm. It acts purely as a mechanical stop and does not change the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.