
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X35-40B is a double-acting compact cylinder featuring a male-thread piston rod and an external extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position from 0 to 35 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, while the mechanical stop sets the endpoint without altering the internal piston area.
The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X35-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 35 mm during prototype runs to find the exact contact point for a 50 kg workpiece without machining new spacers.
Adjust the mechanical stop on-site to match different carton depths, using the fixed NBR bumper to absorb the 981.7 N extend impact at 0.5 MPa.
Set the precise 0-35 mm forward endpoint for seating bearings, relying on the male M18x1.5 rod thread to secure the tooling head.
Choose this unit when you need on-site stroke tuning for trial positioning.
Confirm the bore, 35 mm maximum stroke, 40 mm adjustment window, and PT1/4 port. This SKU includes the -B male M18x1.5 rod thread but lacks the -S magnet, so it cannot accept reed or electronic switches. A plain cylinder does not hold position on air loss or valve centring; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M16x1.5 R screw mechanically shortens the extend stop by up to 40 mm, giving a usable forward range of 0-35 mm. It does not change the force and is not a mid-stroke lock. The cylinder cannot hold a load if air is lost; use an external rod lock or pilot-operated check valve for holding. This specific SKU lacks a magnet for switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.