verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke40 mm
  • Adjustable range20–40 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$61.63 $69.13Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B

The AirTAC SDAJ50X40-20B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 20 and 40 mm, eliminating the need for shims or part swaps during commissioning.

This model uses a male-threaded M18x1.5 piston rod and a PT1/4 air port. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel shock is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot support reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke40 mm
Adjustable range20 – 40 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×40Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 20 to 40 mm via the M16x1.5 screw to adapt a 50 mm bore actuator to new fixture heights without machining spacers.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for a 50 kg lift payload, relying on the male M18x1.5 rod end to secure tooling while avoiding hard mechanical crashes.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B the Right Cylinder?

When sizing this unit, evaluate the force margins both ways. Choose this 50 mm bore if your changeover process requires frequent on-machine stroke tuning between 20 and 40 mm.

Confirm the bore, 40 mm maximum stroke, 20 mm adjustment window, and PT1/4 port match your pneumatic layout. This specific SKU includes the -B option, meaning it has a male M18x1.5 rod end rather than a female thread. Because it lacks the -S magnet, position sensing is unavailable without changing the model. Finally, a plain compact cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates near the end of travel. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B FAQ

The air port is PT1/4.

Turning the external R (M16x1.5) screw mechanically shortens the extend stroke anywhere from the full 40 mm down to 20 mm; retract remains full stroke. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches unless you switch to an -S variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-20B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X40-20B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.