
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-30 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X40-30 is a compact double-acting double-rod cylinder built for tight axial mounting spaces. Its short riveted body provides a minimal footprint where round-body or profile cylinders cannot fit, while still delivering robust performance. The unit operates on air at 30-500 mm/s across a temperature range of -20 to +70 C.
An external M16x1.5 R adjuster screw lets you dial the extend stop directly on the machine between 10 and 40 mm without shims or part changes. End shock is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X40-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 40 mm on the fly to accommodate varying fixture heights without machining new spacers.
Set precise lower endpoints for light pressing tasks, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
Choosing this 50 mm bore involves sizing both ways against its neighbors. It is ideal for operators needing frequent on-machine stroke tuning during changeovers.
Confirm your parameters before ordering: a 50 mm bore, 40 mm maximum stroke, 30 mm adjustment window, and a PT1/4 port. This specific SKU lacks the -S magnet, meaning it cannot accept AirTAC reed or electronic switches. The rod end features a female M10x1.5 thread on a 20 mm diameter rod. Remember that a plain cylinder does not hold its load on air loss or valve centering; the piston drifts, so integrate an external rod lock or pilot-operated check valve for held load requirements.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa and speed is 30-500 mm/s.
The M16x1.5 R screw shortens the extend end position anywhere from 40 mm down to 10 mm. It is not a mid-stroke lock; the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.