
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X45-40B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. Turning this R thread lets you dial the extend end-position anywhere between 5 and 45 mm directly on the machine, eliminating the need for shims or part swaps.
This specific SKU includes a male M18x1.5 piston rod thread and utilizes a PT1/4 air port. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this configuration lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X45-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 45 mm on the fly to accommodate different product widths without fabricating new spacer plates.
When sizing this 50 mm bore, evaluate both neighboring options against your exact thrust requirements.
Choose this male-rod (-B) model if your tooling requires an M18x1.5 threaded attachment. The 40 mm adjustment window is ideal for lines requiring frequent format changeovers or trial positioning. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the stroke end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The air port is PT1/4.
The M16x1.5 adjuster screw mechanically shortens the extend stroke by up to 40 mm, yielding a 5 to 45 mm usable range. It does not alter force and is not a mid-stroke lock; the cylinder drifts if air is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.