verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke5 mm
  • Adjustable range0–5 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$49.54 $57.04Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10

The AirTAC SDAJ50X5-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R M16x1.5 screw lets you dial the outward position down to 0 mm from the 5 mm maximum, providing exact endpoint tuning directly on the machine without swapping shims or parts. Retract travel remains full length.

Built with a short riveted body, this unit saves valuable axial mounting depth where a longer cylinder would fail to fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke5 mm
Adjustable range0 – 5 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×5Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10 Is Used

precision_manufacturing

Precision Short-Stroke Clamping

Dial in the exact 0-5 mm outward clamp position on the fly to accommodate varying part tolerances during production changeovers.

factory

Shallow Footprint Tooling

Install in tight machine stations where the short riveted body saves axial depth and the fixed NBR bumper handles end shock reliably.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10 the Right Cylinder?

Stepping down to the SDAJ40 provides 628.3 N, whereas stepping up to the SDAJ63 delivers 1558.6 N at the same pressure.

Choose this configuration if your fixture requires on-site stroke tuning within the 0-5 mm extend window. Confirm the PT1/4 port, female M10x1.5 rod thread, and the absence of a magnet. Remember that a plain cylinder drifts if air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–5 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10 FAQ

The adjustment screw does not alter these force values.

The R M16x1.5 screw shortens the extend stop by up to 10 mm, yielding a usable 0-5 mm outward range. This SKU has no piston magnet and cannot take magnetic switches; selecting the -S variant adds a magnet compatible with AirTAC reed or electronic sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X5-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X5-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.