
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X55-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position on the machine between 25 and 55 mm, removing the need for shims or part swaps during changeovers.
This variant uses a male M18x1.5 rod end and a PT1/4 port. Its short riveted body minimizes axial mounting depth where space is tight. The unit relies on a fixed NBR bumper to decelerate the stroke end, and this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X55-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the extend stop on-site during product changeovers to alter the pusher stroke, saving axial space in tight transfer lines with its compact body.
Choose this male-rod model when your tooling requires an M18x1.5 threaded attachment point.
Operators needing on-site stroke tuning between 25 and 55 mm will benefit from the external stop. Remember that a plain cylinder does not hold position on air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your bore, 55 mm maximum stroke, 30 mm window, PT1/4 port, male M18x1.5 rod, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The air port is PT1/4, and the piston rod features a male M18x1.5 thread.
Turning the external M16x1.5 screw shortens the extend stroke by up to 30 mm, allowing an on-machine range of 25 to 55 mm. The screw acts only as a mechanical stop and does not lock the piston; if air is lost, the cylinder drifts. For load holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.