
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-40 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X60-40 is a compact double-acting double-rod cylinder built for applications requiring a variable extend end-position. An external M16x1.5 adjuster screw lets you dial the forward stop from 20 to 60 mm directly on the machine, eliminating the need for shims or part swaps. The retract stroke remains full length.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if position sensing is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X60-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to fold differing box heights without changing parts, relying on the fixed NBR bumper to absorb the 30-500 mm/s impact.
Set precise lower endpoints for elevators lifting approximately 50 kg loads, using the M16x1.5 screw to fine-tune the drop depth safely.
When sizing this 50 mm bore actuator, evaluate your force needs both ways. Choose this model if your assembly process requires frequent on-machine stroke tuning to accommodate different part heights.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 60 mm maximum stroke, 40 mm adjustment window, PT1/4 port, and female M10x1.5 rod-end thread before ordering.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external R screw shortens the extend stroke by up to 40 mm, allowing a usable range of 20-60 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss without an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.