
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-10B is a compact double-acting double-rod cylinder built for tight axial mounting spaces where round-body or profile variants will not fit. It features an external M16x1.5 R screw that lets you dial the extend stop on-site between 55 and 65 mm without changing parts.
This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. A fixed NBR bumper at each end decelerates the stroke end; it is not an adjustable air cushion. The adjuster sets the mechanical stop position and does not alter the bore area or function as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the extend position for new product runs using the external M16x1.5 adjuster screw within the 10 mm window.
Choose this 50 mm bore if your application demands that middle ground of force.
This model suits operators needing on-machine stroke tuning to perfect end positions during setup or changeover. Confirm the 50 mm bore, 65 mm maximum stroke, 10 mm adjust window, PT1/4 port, male M18x1.5 rod, and absence of a magnet. Remember that a plain SDAJ does not hold position if air is lost or the valve is centered; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, speed is 30-500 mm/s, and temperature ranges from -20 to +70 C.
Turning the external R (M16x1.5) screw shortens the extend stop by up to 10 mm, giving a usable extend range of 55-65 mm. This SKU lacks the -S magnet option, so it cannot support reed or electronic switches; the -S variant is required for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.