
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M16x1.5) screw lets you dial the forward end-position between 45 and 65 mm directly on your equipment, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where round-body alternatives will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; choose the -S variant if sensing is required.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45-65 mm extend stop during fixture changeovers to clamp parts securely without machining new spacers.
Fine-tune the pusher stroke on the fly to accommodate varying package widths on a single sorting line.
Set a precise mechanical upper limit for a 50 kg lift application, relying on the fixed bumper to decelerate the load.
Choose the 50 mm bore when you need robust force in a tight footprint.
Operators who require frequent changeovers or trial positioning benefit most from the 45-65 mm on-site tuning window. Remember that a plain cylinder does not hold position on air loss or valve centring; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your specs: 50 mm bore, 65 mm stroke, 20 mm window, PT1/4 port, female M10x1.5 rod thread, and no magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The external M16x1.5 screw shortens the extend stroke by up to 20 mm, allowing you to set the forward stop anywhere between 45 and 65 mm. It acts as a mechanical stop and does not alter the cylinder's force or lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.