
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-40B is a compact double-acting double-rod cylinder built for applications requiring a variable extend end-position. An external M16x1.5 adjuster screw lets you dial the forward stop anywhere between 25 and 65 mm directly on the machine, eliminating the need for shims or part swaps.
This variant features a male M18x1.5 piston rod thread and a short riveted body that saves valuable axial mounting depth where longer profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 25 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Reposition the diverting arm endpoint on the conveyor frame during product changeovers, using the male M18x1.5 rod to push different package sizes accurately.
Set precise upper travel limits for a 50 kg vertical lift actuator, relying on the mechanical stop to define the resting position rather than pneumatic pressure.
Choose this 50 mm bore when your load falls squarely in that mid-range.
This model is ideal for setups requiring frequent on-site stroke tuning during changeovers. Confirm your installation parameters: 50 mm bore, 65 mm max stroke, 40 mm adjustment window, PT1/4 port, male M18x1.5 rod thread, and no magnet. Remember that a plain cylinder does not hold position if air pressure drops or the valve is centered; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the M16x1.5 adjuster screw mechanically shortens the extend stop from the 65 mm maximum down to 25 mm without changing the force output. The cylinder does not hold load on air loss; use an external rod lock or pilot check valve for position holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.