
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X65-50B is a compact double-acting cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine between 15 and 65 mm.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units fail to fit. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but does not function as an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X65-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 15 to 65 mm extend stop during setup to clamp varied workpiece heights without machining custom spacers.
Set precise upper travel limits for elevating 50 kg loads, relying on the male M18x1.5 thread for robust load coupling.
Choose this model if your fixture requires frequent on-site stroke tuning to accommodate part changeovers. Verify your setup requires a male M18x1.5 rod end and a PT1/4 port. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the piston will drift. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the fixed bumper only decelerates near the end of travel and never locks the load.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the M16x1.5 external screw shortens the extend stroke by up to 50 mm, allowing on-machine positioning between 15 and 65 mm. This unit uses a male M18x1.5 rod end, and because it lacks the -S magnet, it cannot accept position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.