
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-30B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 40 to 70 mm directly on your machine. The male-thread M18x1.5 piston rod (Ø20 mm) simplifies direct tool mounting.
Its short riveted body drastically cuts axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper at each end decelerates the stroke end. Operating pressure spans 0.15 to 1.0 MPa, and the bore accepts PT1/4 air ports. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 70 mm to position clamping heads on varying fixture widths without machining custom spacers.
Fine-tune the male M18x1.5 rod extension on-site to accommodate different box heights during rapid packaging changeovers.
Choose this 50 mm bore when your changeover routines demand on-site stroke tuning between 40 and 70 mm.
Confirm the 50 mm bore, 70 mm maximum stroke, 30 mm adjust window, PT1/4 port, and the male M18x1.5 rod thread for your mounting interface. Remember that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The air port is PT1/4.
Turning the M16x1.5 external screw shortens the extend stroke by up to 30 mm, yielding a usable 40-70 mm range without altering the force. This SKU has no magnet; you must select the -S variant to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.