
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-75B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X70-75B is a compact double-acting double-rod cylinder featuring an external extend stop. A front M16x1.5 adjuster screw lets you dial the outward stroke down from its 70 mm maximum right at the machine, yielding a usable extend range of 0-70 mm without swapping shims or parts.
Built with a short riveted body, this unit saves axial mounting depth where a longer profile cylinder will not fit. It carries a male M18x1.5 piston rod end for direct external threading. End-of-travel energy is managed strictly by a fixed NBR bumper that decelerates the piston, meaning it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X70-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 screw to set the extend between 0 and 70 mm, delivering 981.7 N of clamping force at 0.5 MPa without retooling the fixture for different part heights.
Use the male M18x1.5 rod to push varying box sizes, tweaking the 0-70 mm extend window during product changeovers to avoid crushing the corrugated board.
When sizing this 50 mm bore, evaluate both neighboring options.
Choose this configuration when your fixture requires on-site extend tuning between 0 and 70 mm via the M16x1.5 screw. The male M18x1.5 rod thread must match your mating tooling. Note that a plain cylinder drifts if air pressure drops or the valve centers; the fixed NBR bumper only softens the end impact and does not lock the load. For vertical holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the external R M16x1.5 screw shortens the extend end position from the 70 mm maximum down to 0 mm. It cannot hold a load mid-stroke if air is lost; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.