
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-10S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke on the machine across a 65 to 75 mm window, eliminating the need for shims or part swaps during changeovers.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 65 to 75 mm during machine setup to accommodate varying part heights without fabricating new spacers.
Set precise upper travel limits for 50 kg lifting fixtures, using the mechanical stop to define the exact raise height.
When sizing this 50 mm bore actuator, evaluate your thrust requirements against its neighbours.
Choose this specific unit if your fixture requires on-site stroke tuning between 65 and 75 mm. Confirm your setup needs a PT1/4 port, a 20 mm piston rod, and an M10x1.5 female rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend end-position by up to 10 mm, giving a usable range of 65-75 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.