
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-30S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M16x1.5 adjuster screw lets you dial the outward stroke down from 75 mm to 45 mm directly on the machine, eliminating shims or part swaps. Retract remains full length.
This 50 mm bore unit saves axial mounting depth through its short riveted body, fitting where round-body alternatives will not. The piston rod measures 20 mm with a PT1/4 port. Equipped with a built-in magnet (-S), it supports AirTAC reed or electronic switches for position sensing. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward reach on the fly for different box depths without changing hardware, relying on the fixed NBR bumper for end deceleration.
Stepping down to SDAJ40 provides 628.3 N, while stepping up to SDAJ63 offers 1558.6 N. Choose this model if your fixture requires frequent on-site stroke tuning during changeovers.
Confirm the 50 mm bore, 75 mm maximum stroke, 30 mm adjustment window, and PT1/4 port. This variant includes the -S magnet for electronic or reed sensing and uses a female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold position on air loss or valve centring; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 screw shortens the extend stop from 75 mm down to 45 mm without altering force. The -S option adds a piston magnet for AirTAC reed or electronic switches to confirm position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.