verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke75 mm
  • Adjustable range35–75 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$74.87 $82.37Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B

The AirTAC SDAJ50X75-40B is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop anywhere between 35 and 75 mm directly on your machine. The short riveted body minimizes axial mounting depth where space is tight.

This specific SKU includes a male-threaded M18x1.5 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. For heavy dynamic loads, consider adding an external shock absorber to manage impact energy.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke75 mm
Adjustable range35 – 75 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×75Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B Is Used

precision_manufacturing

Machining Clamp Depth

Dial the extend stop from 35 to 75 mm to set precise clamping depth on raw castings of varying widths without machining custom spacers.

sync_alt

Changeover Dials

Speed up product family changeovers on a packaging line by turning the M16x1.5 screw to reposition the pusher stroke on-site in seconds.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B the Right Cylinder?

Choose this 75 mm stroke with the 40 mm window if your fixture requires frequent trial positioning or rapid changeover.

Confirm your setup needs the male M18x1.5 rod end and the PT1/4 air port. Note that a plain SDAJ does not hold position or carry load if air pressure drops or the valve centers—the fixed bumper only decelerates near the end cap and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B FAQ

The external M16x1.5 screw mechanically shortens the extend stroke by up to 40 mm (range 35-75 mm) without changing the force output. It is not a mid-stroke lock; the cylinder cannot hold a load if air is lost, as the NBR bumper only decelerates the stroke end.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ50X75-40B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.