
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-40S is a compact double-acting double-rod cylinder engineered for on-site stroke tuning. An external M16x1.5 adjuster screw lets you dial the extend end-position anywhere between 35 and 75 mm without swapping shims or parts.
This 50 mm bore unit features a short riveted body that minimizes axial mounting depth in tight fixtures. It carries a built-in piston magnet for AirTAC reed or electronic solid-state switches, and relies on a fixed NBR bumper at each end to absorb shock. The adjuster acts strictly as a mechanical stop, not a mid-stroke lock or brake.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 75 mm during rapid tooling changeovers to accommodate different part depths without machining new spacers.
Fine-tune the lift height during prototype runs, verifying the 50 kg vertical lift margin before locking the M16x1.5 adjuster for production.
Choose it when your setup demands precise extend-position tuning between 35 and 75 mm on the machine floor.
Confirm the 50 mm bore, 75 mm maximum stroke, 40 mm adjustment window, and PT1/4 port. This variant includes the -S magnet for position sensing and a female M10x1.5 rod-end thread. Remember that a plain compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The air port is PT1/4.
Turning the external M16x1.5 screw shortens the extend stroke by up to 40 mm, allowing usable travel between 35 and 75 mm. The included -S magnet enables detection by AirTAC reed or electronic switches; the screw sets the stop position and does not alter force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.