
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-75S is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X75-75S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 0 to 75 mm directly on your machine. Retract travel stays full length while the extend end-position is fully customizable.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting neatly into tight machine frames. The bore accepts a PT1/4 air port and uses a 20 mm piston rod. A fixed NBR bumper decelerates the stroke end, and the built-in magnet (-S) supports AirTAC reed or electronic switches for precise end-position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X75-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 0 to 75 mm during prototype runs to find the exact 981.7 N contact point without machining new spacers.
Adjust the mechanical stop on the fly for different carton depths, using the 20 mm rod to push flaps securely at 0.5 MPa.
Choose this specific model if your assembly process requires frequent on-machine stroke tuning across the full 0-75 mm window.
Confirm the 50 mm bore, 75 mm maximum stroke, 75 mm adjustment window, PT1/4 port, and the female M10x1.5 rod-end thread suit your tooling. The -S code ensures a piston magnet is present for sensing. Note that the fixed NBR bumper only decelerates near the end of travel; a plain cylinder does not hold position on air loss, so specify an external rod lock or pilot-operated check valve for load holding.
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 external screw shortens the extend stroke by up to 75 mm, giving a usable extend range of 0-75 mm without changing parts. The -S option adds a piston magnet for AirTAC reed or electronic switches; the screw only sets the stop and does not lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.