
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-10 is a double-acting compact cylinder featuring a 50mm bore and an external adjustable extend stop. A front M16x1.5 adjuster screw lets you dial the extend stroke down from 80mm to 70mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body conserves axial mounting depth in tight fixtures where longer profile cylinders will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 70mm and 80mm during die swaps to accommodate varying part thicknesses without machining new spacers.
Choose this 50mm bore when your application falls squarely in that 60kg payload band.
Operators needing frequent changeovers or trial positioning will benefit from the 10mm on-site adjustment window. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston drifts, as the fixed bumper and R screw only manage end stops, not locking. For suspended loads, install an external rod lock or pilot-operated check valve. Confirm your requirements for a 50mm bore, 80mm stroke, 10mm window, PT1/4 port, female M10x1.5 rod thread, and no magnet.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
This 50mm bore cylinder uses a PT1/4 air port.
The front M16x1.5 screw acts as a mechanical stop, shortening the extend stroke from 80mm down to 70mm without changing the force. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.