
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-10B is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop down from 80 mm to 70 mm directly on the machine.
Its short riveted body saves valuable axial mounting depth where a longer cylinder would not fit. This specific SKU includes a male M18x1.5 piston rod end and lacks a piston magnet, meaning it cannot accept reed or electronic switches without the -S option. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 70-80 mm extend stop to seat a raw casting perfectly against a locater pin, absorbing part variance without reprogramming the machine cycle.
Set the exact 75 mm bottoming depth for pressing bearings, relying on the fixed NBR bumper to absorb the 0.5 MPa end shock without damaging the assembly.
Choose this configuration if your fixture requires on-site stroke tuning within that 70-80 mm window. Confirm your setup needs the male M18x1.5 rod thread (-B) and the PT1/4 port. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the fixed bumper only decelerates the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The theoretical maximum push is 200 kgf at 1.0 MPa.
Turning the M16x1.5 external screw shortens the extend stroke by up to 10 mm, giving a usable range of 70-80 mm. It acts purely as a mechanical stop and does not alter the cylinder's force output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.