verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke80 mm
  • Adjustable range60–80 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$76.99 $84.49Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20

The AirTAC SDAJ50X80-20 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 screw lets you dial the forward end-position anywhere between 60 and 80 mm without swapping parts, while the retract stroke remains full length.

The short riveted body significantly saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; specify the -S variant if sensing is required.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke80 mm
Adjustable range60 – 80 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×80Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20 Is Used

precision_manufacturing

machining Clamping Depth

Dial the M16x1.5 screw to set precise 60-80 mm clamping reach on varied part heights, leveraging 981.7 N of hold force at 0.5 MPa.

packaging

Carton Flap Folding

Adjust the extend stop on-site to accommodate different box sizes without changing cylinders, ensuring the 50 mm rod clears the packaging line.

vertical_align_center

Vertical Lift Stops

Set a hard mechanical stop for a 50 kg vertical lift, preventing over-travel while relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20 the Right Cylinder?

When sizing this unit, evaluate your thrust requirements both ways. Choose this model if your fixture requires exact 60-80 mm extend tuning during changeovers.

Confirm your parameters: 50 mm bore, 80 mm max stroke, 20 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and no magnet. A plain cylinder drifts when air is lost or the valve is centered—the fixed bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20 FAQ

Turning the external R (M16x1.5) screw shortens the forward stroke by up to 20 mm, giving a usable extend range of 60 to 80 mm. It acts purely as a mechanical stop and does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X80-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.