
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-30B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X80-30B is a double-acting compact cylinder featuring a male-thread piston rod (M18x1.5) and an external R (M16x1.5) adjuster screw. This mechanism allows you to dial the extend end-position anywhere between 50 and 80 mm directly on the machine, completely eliminating the need for shims or part swaps during changeovers.
The short riveted body drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the braking effect is constant. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 mm down to 50 mm via the M16x1.5 screw to accommodate different fixture heights during production line changeovers without swapping cylinders.
When sizing this model, evaluate your force requirements against its neighbours.
This unit is ideal for setups requiring frequent on-site stroke tuning between 50 and 80 mm. It features a PT1/4 port, a 20 mm rod diameter, and the -B male M18x1.5 rod thread. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
Turning the external R (M16x1.5) screw mechanically shortens the extend stroke by up to 30 mm, setting the stop anywhere between 50 and 80 mm. It does not alter the force and is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.