verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke80 mm
  • Adjustable range30–80 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$76.99 $84.49Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B

The AirTAC SDAJ50X80-50B is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine. You can tune the outward travel anywhere from 30 to 80 mm without swapping shims or parts, making it ideal for frequent format changes.

Built with a short riveted body, this unit saves axial mounting depth where larger profile or round-body actuators will not fit. It features a male M18x1.5 piston rod thread, a PT1/4 air port, and a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke80 mm
Adjustable range30 – 80 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×80Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B Is Used

precision_manufacturing

Machining Clamp Depth

Dial the extend stop from 30 to 80 mm to accommodate varying raw material thicknesses on a milling fixture without machining new spacer blocks.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for a 50 kg lifting probe, relying on the mechanical stop rather than relying solely on valve timing.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B the Right Cylinder?

Stepping down to the SDAJ40 provides 628.3 N, whereas stepping up to the SDAJ63 yields 1558.6 N.

Select this male-rod (-B) model if your tooling requires an M18x1.5 threaded attachment point and you need on-site stroke tuning across the 50 mm window. Remember that a standard cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must remain fixed without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B FAQ

This 50 mm bore double-acting cylinder pushes 981.7 N and pulls 824.7 N at 0.5 MPa. At 0.7 MPa it pushes 1374.4 N and pulls 1154.5 N. The theoretical maximum push is 200 kgf at 1.0 MPa. The air port is PT1/4.

Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, allowing you to set the outward stop anywhere between 30 and 80 mm. Retract remains full length. This specific SKU lacks a magnet, so it cannot accept switches; you must specify the -S option for reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X80-50B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X80-50B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.