
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-20B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-20B is a compact double-acting double-rod cylinder featuring an external extend stop. A M16x1.5 adjuster screw lets you dial the outward travel on the machine, shortening the stroke by up to 20 mm for a usable range of 65 to 85 mm without changing parts.
This specific SKU uses a male M18x1.5 piston rod thread for direct mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option. The short riveted body minimizes axial footprint where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 65 and 85 mm on the fly to accommodate different part lengths during production line changeovers without swapping hardware.
Fine-tune the outward reach by 20 mm during packaging setup to perfectly fold varying carton sizes, relying on the fixed NBR bumper to absorb end shocks.
Choosing this 50 mm bore involves sizing against its neighbors: dropping down to the 40 mm bore cuts the 0.5 MPa push to 628.3 N, while stepping up to the 63 mm bore raises it to 1558.6 N. It is ideal for setups requiring frequent changeover or trial positioning.
Confirm the 50 mm bore, 85 mm maximum stroke, 20 mm adjust window, and PT1/4 port. This unit includes the male M18x1.5 rod (-B) and no magnet. Remember that the fixed bumper only decelerates the stroke end; a plain cylinder does not hold a load when air is lost or the valve is centered. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the M16x1.5 screw mechanically shortens the extend end-position from the 85 mm maximum down to 65 mm. It acts purely as a physical stop and does not alter force or lock the piston mid-stroke; the cylinder drifts if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.