
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40 is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-40 is a compact double-acting double-rod cylinder featuring an on-site extend stop. A lateral R (M16x1.5) adjustment screw lets you dial the outward travel down from the 85 mm maximum to any point between 45 and 85 mm.
The short riveted body significantly reduces axial mounting depth where a longer cylinder would fail to fit. End-of-travel energy is managed solely by a fixed NBR bumper that decelerates the piston, meaning it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the R screw between 45 and 85 mm to position clamping jaws precisely on raw castings of varying widths without machining custom spacers.
Set exact upward travel limits for a 50 kg lift payload, relying on the fixed NBR bumper to absorb the kinetic energy at the newly tuned end point.
Stepping down to the SDAJ40 yields 628.3 N, whereas stepping up to the SDAJ63 provides 1558.6 N.
Choose this exact configuration if your fixture requires rapid changeovers across a 45 to 85 mm outward reach without swapping hardware. Confirm your porting is PT1/4 and the rod end uses a female M10x1.5 thread. Remember that a plain cylinder drifts when air is lost or the valve is centred; the bumper and adjuster only decelerate and stop travel, so integrate an external rod lock or pilot-operated check valve for load holding.
Quick checklist
Turning the M16x1.5 adjuster screw mechanically shortens the extend end position from the 85 mm maximum down to 45 mm. Retract remains full stroke, and the mechanism does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.