
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X85-50B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. Turning this R screw lets you dial the extend end-position anywhere between 35 and 85 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 85 mm stroke.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for different box formats, saving axial mounting depth in tight forming heads with its compact riveted body.
This model is ideal for operators needing frequent on-site stroke tuning for trial positioning. Confirm the 50 mm bore, 85 mm maximum stroke, 50 mm window, PT1/4 port, and male M18x1.5 rod thread. Note that a plain cylinder does not hold its load on air loss or valve centring—the fixed NBR bumper only decelerates near the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The M16x1.5 R screw shortens the extend stop by up to 50 mm, giving a usable extend range of 35-85 mm; it sets the stop, not the force. It is not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost without an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.