verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke85 mm
  • Adjustable range10–85 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B

The AirTAC SDAJ50X85-75B is a compact double-acting double-rod cylinder built for on-site extend tuning. An external M16x1.5 adjuster screw lets you dial the forward stop anywhere between 10 and 85 mm without swapping shims or parts.

This variant features a male M18x1.5 piston rod thread and a PT1/4 air port. The short riveted body significantly reduces axial mounting depth where larger profile cylinders cannot fit. End shock is managed by a fixed NBR bumper that decelerates the stroke, but note this unit lacks a piston magnet, so it cannot directly host reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke85 mm
Adjustable range10 – 85 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×85Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B Is Used

precision_manufacturing

Machine Tending Setup

Dial the extend stop from 10 to 85 mm during initial commissioning to perfect the gripper reach into a lathe chuck without machining new spacers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B the Right Cylinder?

Stepping down, the SDAJ40 provides 628.3 N, whereas stepping up to the SDAJ63 yields 1558.6 N.

Operators needing frequent changeover or trial positioning will benefit from the 75 mm adjustment window. Verify your requirements for a male M18x1.5 rod, PT1/4 porting, and the absence of a magnet. Remember that a plain cylinder drifts when air is lost or a valve centers; the fixed bumper and mechanical stop do not lock the load. For suspended loads, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B FAQ

No, this specific SKU lacks the -S option, meaning it has no piston magnet and cannot host reed or electronic switches. You would need the -S variant to utilize the body sensor grooves for position detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X85-75B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ50X85-75B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.