
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-40B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ50X90-40B is a compact double-acting cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop anywhere between 50 and 90 mm directly at the machine. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. This specific SKU uses a male M18x1.5 piston rod end and relies on a fixed NBR bumper to decelerate the stroke end.
Since this configuration omits the magnet option, it cannot accept reed or electronic switches. The bore dictates a PT1/4 air port and a 20 mm rod diameter to handle the dynamic load. Operating pressure spans 0.15 to 1.0 MPa, and the fixed bumper absorbs end shock without acting as a mid-stroke lock or adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø50 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 90 mm during rapid tooling changeovers to accommodate varying part widths without fabricating custom spacers.
Set precise vertical lift heights up to a 50 kg payload safely, tweaking the mechanical stop during initial commissioning to find the exact travel before locking the screw.
Stepping down to the SDAJ40 reduces thrust to 628.3 N at 0.5 MPa, while stepping up to the SDAJ63 increases it to 1558.6 N. Choose this 50 mm bore when you need on-site stroke tuning across a 40 mm window without swapping parts. Confirm your requirements for the PT1/4 port, the male M18x1.5 rod thread, and the lack of a piston magnet.
Remember that a plain cylinder does not hold its load when air is lost or the valve is centered. The piston will drift, as the fixed NBR bumper only decelerates near the stroke end and the R screw is a mechanical stop, not a brake. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder
Quick checklist
The bore-fixed air port is PT1/4.
Turning the external M16x1.5 screw shortens the extend stroke by up to 40 mm, yielding a usable range of 50 to 90 mm while retract remains full. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches; you would need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.