verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B is a genuine double-acting COMPACT cylinder (Ø50mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.

  • BoreØ50 mm
  • Max stroke90 mm
  • Adjustable range15–90 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$82.78 $90.28Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ50 stroke, mounting and version on one page All SDAJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B

The AirTAC SDAJ50X90-75B is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can set the outward travel anywhere from 15 to 90 mm without swapping shims or parts, while the retract stroke remains full.

This 50 mm bore unit relies on a short riveted body to save axial mounting depth where a longer profile cylinder will not fit. It carries a fixed NBR bumper at each end to decelerate the stroke end, though this is not an adjustable air cushion. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ50 mm
Max stroke90 mm
Adjustable range15 – 90 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B

SDAJCompact double-acting cylinder with adjustable stroke.
50Bore size in mm.
×90Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B Is Used

precision_manufacturing

Changeover-Heavy Machining

Dial the extend stop from 15 to 90 mm via the M16x1.5 screw to hit exact clamping depths during rapid product changeovers without machining new spacers.

vertical_align_center

Trial Lift Positioning

Safely test vertical lift heights up to a 50 kg load limit, adjusting the outward reach mechanically to find the optimal transfer point before locking the setting.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B the Right Cylinder?

Choose this 50 mm bore if your setup-heavy line requires frequent on-site stroke tuning across the 15 to 90 mm window.

Confirm your parameters before ordering: a 50 mm bore, 90 mm maximum stroke, 75 mm adjust window, and PT1/4 air port. This variant features the B option for a male M18x1.5 rod end, and it has no S magnet. Remember that a plain cylinder does not hold its load on air loss or when a valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ50 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj50-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B FAQ

Turning the external M16x1.5 screw shortens the extend stop by up to 75 mm, giving a usable outward range of 15 to 90 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ50X90-75B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ50X90-75B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.