
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-30B is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X75-30B is a compact double-acting double-rod cylinder engineered with an external adjustable extend stop. By turning the R (M27x2.0) screw, technicians can dial the forward stroke down from 75 mm to 45 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This 100 mm bore unit features a robust 32 mm piston rod and a male M26x1.5 thread end for secure heavy-load mounting. Its short riveted body saves valuable axial depth where larger profile or round-body units would fail to fit. End-of-stroke impact is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion or a locking mechanism.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Lift payloads up to a safe 200.2 kg working load in compact elevators, using the male M26x1.5 rod thread for rigid coupling and the R screw to set precise upper stops.
Adapt end-of-arm tooling positions across product variants quickly by turning the M27x2.0 adjuster, saving axial space in tight robotic cells with the short riveted body.
Stepping down to the SDAJ80 yields 2513.3 N, which may be insufficient for heavy pressing or lifting tasks, whereas stepping up to a larger custom bore is rarely feasible in compact footprints.
This specific SKU includes the -B option, providing a male M26x1.5 piston rod thread rather than the default female M18x1.5, and uses a PT3/8 air port. Note that it lacks the -S magnet, so it cannot accept AirTAC reed or electronic switches. Remember that a plain cylinder does not hold its load on air loss or valve centering; the fixed bumper only decelerates near the end of travel. For suspended or vertical loads, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
The external R (M27x2.0) screw mechanically limits the extend stroke, allowing you to set the forward position anywhere between 45 and 75 mm. Retract remains full stroke. Because this SKU lacks the -S magnet, it cannot be used with magnetic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.