
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-75 is a genuine double-acting COMPACT cylinder (Ø100mm bore) whose extend end-position is set by an external M27×2.0 adjustment screw. You can dial the stroke anywhere from 0 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ100X75-75 is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M27x2.0) screw lets you dial the outward stroke from 0 to 75 mm directly on your machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, while the stop sets the end position without altering the pneumatic area.
The short riveted body saves valuable axial mounting depth where larger profile cylinders will not fit. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke end; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ100X75-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø100 mm |
| Max stroke | 75 mm |
| Adjustable range | 0 – 75 mm |
| Adjuster thread (R) | M27×2.0 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M18×1.5 F / M26×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3525 N | 3525 N |
| 0.7 MPa | 4935 N | — |
| Max (@1.0 MPa) | 719 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up product changeovers by turning the M27x2.0 adjuster screw to reposition the extend endpoint, saving axial space with the compact riveted body.
Choose this model if your assembly line requires frequent on-site stroke tuning within the 0 to 75 mm window.
Confirm your parameters: 100 mm bore, 75 mm maximum stroke, 75 mm adjustment window, and a PT3/8 air port. The rod end thread is female M18x1.5, and the rod itself is 32 mm in diameter. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ100 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj100-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 5497.8 N and pull to 4934.8 N. The theoretical maximum push is 801 kgf at 1.0 MPa.
The external R (M27x2.0) screw shortens the extend stop by up to 75 mm, allowing you to set the outward stroke anywhere between 0 and 75 mm. This SKU has no piston magnet, so it cannot use magnetic switches; choose the -S option if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.