
Genuine AirTAC piston pressure regulator, order code SDR200061 from the SDR range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The SDR200061 is the 1/8 port version of the larger AirTAC SDR200 piston back-pressure regulator, ordered here with PT thread and the scale digit 1, which fits an MPa pressure gauge at the outlet. The piston back-pressure design is simple, small and cost-effective, and output pressure stays stable in circuits that do not need high regulating accuracy.
As a standard-type SDR200 it regulates 0.05-0.9 MPa, with maximum operating pressure 1.0 MPa (145 psi) and proof pressure 1.5 MPa (215 psi). Air is the fluid, the temperature range is -20 to +70 C, and the mounting bracket is included as standard, so it installs as a single unit straight onto the machine frame.
| Order code | SDR200061 |
|---|---|
| Product | Piston Pressure Regulator |
| Model and port | SDR200 · PT1/8 |
| Type and bracket | Standard, with bracket |
| Pressure gauge | MPa gauge (1) |
| Structure | Piston back-pressure type |
|---|---|
| Fluid | Air |
| SDR100 ports | M5 / 1/8 |
| SDR200 ports | 1/8 / 1/4 |
| Regulating range | 0.05-0.9 MPa (standard), 0.03-0.4 MPa (L) |
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
Source: AirTAC Products Catalog 2026A (PDF01-P0274), SDR series specifications and ordering code.
Pick SDR200061 when your line pressure sits anywhere in 0.05-0.9 MPa and you want a local MPa readout on a PT1/8 port. If 1/4 pipework is already in place, move to SDR20008 on the same series; if the run is small, SDR10006 shrinks the port to the SDR100 body. Delete the gauge with SDR20006N, switch scale with SDR200062 (psi) or SDR200063 (bar), widen low-end resolution with SDR20006L (0.03-0.4 MPa), or drop the bracket with SDR20006J1.
A PT1/8 branch feeding directional valves can be set anywhere in the 0.05-0.9 MPa range, with the MPa gauge giving operators a direct local readout at the valve manifold.
On production machinery where good value matters more than fine regulating accuracy, the piston back-pressure design keeps branch pressure stable up to 1.0 MPa (145 psi) maximum.
With the included bracket, the unit installs as a single point-of-use regulator next to the equipment it serves, handling air at -20 to +70 C without extra mounting parts.
SDR200 series piston back-pressure regulator, PT1/8 port, standard regulating range 0.05-0.9 MPa, max pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), air at -20 to +70 C. Code 1 fits the MPa scale gauge; the bracket is included.
The trailing digit selects the gauge scale: 1 = MPa, 2 = psi, 3 = bar. So SDR200061 is the PT1/8 standard unit with an MPa gauge. The digit is left out entirely with code N, which deletes the gauge; confirm your preferred scale from the ordering code before purchase.