
Genuine AirTAC piston pressure regulator, order code SDR20008L1 from the SDR range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The L code is what separates SDR20008L1 from the standard SDR200 regulator: the regulating range moves from 0.05-0.9 MPa down to 0.03-0.4 MPa, so the adjustment span concentrates in the band where low-pressure circuits actually work. A scale-1 MPa gauge is fitted, letting you watch the set value directly on the unit, and the bracket is included for straightforward single-unit mounting.
The PT1/4 port suits 1/4 pipework, and the piston back-pressure structure keeps output pressure stable without a premium regulating-accuracy design. Even in the low-pressure version the body still withstands a maximum pressure of 1.0 MPa (145 psi) and proof pressure of 1.5 MPa (215 psi), with a -20 to +70 C temperature window for air service.
| Order code | SDR20008L1 |
|---|---|
| Product | Piston Pressure Regulator |
| Model and port | SDR200 · PT1/4 |
| Type and bracket | Low-pressure (L), with bracket |
| Pressure gauge | MPa gauge (1) |
| Structure | Piston back-pressure type |
|---|---|
| Fluid | Air |
| SDR100 ports | M5 / 1/8 |
| SDR200 ports | 1/8 / 1/4 |
| Regulating range | 0.05-0.9 MPa (standard), 0.03-0.4 MPa (L) |
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
Source: AirTAC Products Catalog 2026A (PDF01-P0274), SDR series specifications and ordering code.
Compare first with standard-range SDR20008: pick SDR20008L1 instead when every set point stays below 0.4 MPa, because the L range spreads 0.03-0.4 MPa across the same knob travel. Beside SDR20008LJ1, this code adds the mounting bracket; and if your panel reads in other units, the ordering table lists scale codes 2 (psi) and 3 (bar) alongside 1 (MPa).
Hold gentle air pressures between 0.03 and 0.4 MPa on benches or small process lines where the L range gives finer low-end adjustment.
Feed workpiece clamps that must not crush delicate parts, using the fitted MPa gauge to verify the low set pressure.
Regulate low-pressure air jets and assist cylinders on packaging machines that run well below the standard 0.9 MPa ceiling.
SDR200 series, PT1/4 port, low-pressure (L) regulating range 0.03-0.4 MPa for air. Maximum pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C. Supplied with a scale-1 MPa pressure gauge and with the mounting bracket included.
No. The L code only narrows the regulating range to 0.03-0.4 MPa for better low-end control; maximum operating pressure stays at 1.0 MPa and proof pressure at 1.5 MPa, same as the standard SDR200 build. Confirm the full datasheet before sizing the upstream supply.