
Genuine AirTAC piston pressure regulator, order code SDR20008LJ1 from the SDR range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
SDR20008LJ1 combines the two cost-saving codes of the SDR ordering table with the low-pressure function: L sets the regulating range to 0.03-0.4 MPa, and J removes the mounting bracket so the PT1/4 body bolts directly onto your own manifold or machine plate. The scale-1 MPa gauge is retained, which is the practical difference from an N-code build - you can still read the set pressure on the unit itself.
The piston back-pressure structure keeps output pressure stable in circuits that value simplicity and cost over high regulating accuracy. It handles air up to a maximum pressure of 1.0 MPa (145 psi), proof pressure of 1.5 MPa (215 psi), and operates from -20 to +70 C, matching the rest of the SDR200 series.
| Order code | SDR20008LJ1 |
|---|---|
| Product | Piston Pressure Regulator |
| Model and port | SDR200 · PT1/4 |
| Type and bracket | Low-pressure (L), no bracket (J) |
| Pressure gauge | MPa gauge (1) |
| Structure | Piston back-pressure type |
|---|---|
| Fluid | Air |
| SDR100 ports | M5 / 1/8 |
| SDR200 ports | 1/8 / 1/4 |
| Regulating range | 0.05-0.9 MPa (standard), 0.03-0.4 MPa (L) |
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
Source: AirTAC Products Catalog 2026A (PDF01-P0274), SDR series specifications and ordering code.
The nearest sibling is SDR20008L1, identical in range, thread and gauge but supplied with the bracket; choose SDR20008LJ1 when your fixture provides the mounting. Adding N would also remove the gauge, and moving to standard-range SDR20008L restores the 0.05-0.9 MPa span if your set points climb above 0.4 MPa.
Bolt the bracketless PT1/4 body straight onto an existing manifold plate, keeping the MPa gauge for local setting between 0.03 and 0.4 MPa.
Drop into older equipment that already carries its own regulator bracket, using the L range for circuits running below 0.4 MPa.
Standardize on one low-pressure 1/4-port regulator for spares, with the gauge fitted so technicians set pressure without extra instruments.
SDR200 series, PT1/4 port, low-pressure (L) range 0.03-0.4 MPa for air. Maximum pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C. The J code deletes the bracket; the gauge is fitted with scale-1 MPa markings.
Only the mounting hardware: J means the unit is supplied without bracket, so plan for your own panel, manifold or machine provision to hold the PT1/4 body. The L low-pressure range and the MPa gauge are unchanged; ordering with N instead would additionally remove the gauge.