
Genuine AirTAC piston pressure regulator, order code SDR20008LN from the SDR range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
SDR20008LN decodes as the SDR200 body with 08 ports in PT1/4, the L low-pressure trim, and a blank bracket field, so the AirTAC mounting bracket ships fitted while the N option leaves the gauge off. The L trim is what separates it from standard codes: it regulates 0.03-0.4 MPa, reaching setpoints the standard 0.05-0.9 MPa band cannot.
The bracket makes this version the practical pick for screwing the regulator to a machine plate or sub-panel with its own hardware. Behind it sits the same piston back-pressure design AirTAC describes as simple, small and cost-effective, with 1.0 MPa maximum operating pressure and 1.5 MPa proof pressure giving comfortable margin over the 0.4 MPa ceiling.
| Order code | SDR20008LN |
|---|---|
| Product | Piston Pressure Regulator |
| Model and port | SDR200 · PT1/4 |
| Type and bracket | Low-pressure (L), with bracket |
| Pressure gauge | No gauge (N) |
| Structure | Piston back-pressure type |
|---|---|
| Fluid | Air |
| SDR100 ports | M5 / 1/8 |
| SDR200 ports | 1/8 / 1/4 |
| Regulating range | 0.05-0.9 MPa (standard), 0.03-0.4 MPa (L) |
| Max. pressure | 1.0 MPa (145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
Source: AirTAC Products Catalog 2026A (PDF01-P0274), SDR series specifications and ordering code.
SDR20008LN sits between two neighbours. Choose it over SDR20008LJN when you want the factory bracket included rather than deleting it with J, and over standard-range codes such as SDR20008N when every setpoint stays below 0.4 MPa and you need the 0.03 MPa low floor. If a local pressure reading becomes necessary later, sibling codes with the gauge fitted accept scale 1 (MPa), 2 (psi) or 3 (bar) in place of N.
Feeder vibrators and light clamps that deform or slip above 0.4 MPa run cleanly inside the L window, with the 0.03 MPa floor for the gentlest settings.
The supplied bracket lets the PT1/4 regulator be fixed directly to a machine plate, keeping the set point visible and serviceable at the station.
Test benches feeding delicate cylinders or instruments below 0.4 MPa use the L trim, with 1.5 MPa proof pressure protecting against accidental over-pressure.
SDR200 piston back-pressure regulator, PT1/4 ports, low-pressure L range 0.03-0.4 MPa, maximum operating pressure 1.0 MPa (145 psi), proof pressure 1.5 MPa, temperature -20 to +70 C. Bracket included; option N means no gauge is fitted.
In the SDR ordering code, L selects the low-pressure type with its 0.03-0.4 MPa regulating range, and N deletes the pressure gauge. The blank bracket field keeps the mounting bracket, unlike the J variant. Gauge scale codes 1, 2 and 3 (MPa, psi, bar) apply only to versions ordered with a gauge.